HS-P Series Hall Current Sensor for Static Converters for DC Motor Drives, AC Variable Speed Drives and Servo Motor Drives, SMPS, UPS

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Model NO.: HS
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

HS-P Series Hall Current Sensor

LI051V1/2008-EN
1.Features:
With an elegant outline and the ability to be directly soldered onto a PCB.
Utilizing Hall's effect and magnetic compensation, this device offers high galvanic isolation between the primary and secondary loops being measured.
Capable of measuring DC, AC, and impulse currents.
Completely sealed, with strong mechanical and environmental endurance, as well as strong dielectric strength, this device is safe and reliable.
2.Ambient Conditions:
Ambient temperature: -20ºC~+75ºC;
Relative humidity: ≤90% at 40ºC;
Storage temperature: -40ºC~+95ºC
Atmospheric pressure: 860~1060mbar
(about 650~800mmHg);
3.Range of Operating Frequency: 0~150kHz;
4.Insulation Rating: Class B (130ºC).
5.Safety features:
Insulation resistance: >1000MΩ in normal condition;
Insulation withstand voltages: 3000V 50Hz/1 min;
Fire retardancy: In conformity with UL94-Vo.
6.Outline Drawing, Installation Dimension: (unit : mm)
 (Note:NC means no connecting pin, only for fixing)
7.Technical Parameters:

Models Spec.	HS-20A-P	HS-30A-P	HS-50A-P	HS-100A-P
Rated Input Current(IIN)	20A	30A	50A	100A
Measuring Range	0~30A	0~45A	0~75A	0~150A
Rated Output Current(IOUT)	50mA	50mA	100mA	100mA
Measuring Resistor	≤ 85Ω	≤80Ω	≤40Ω	≤30Ω
Working Voltage	±15V DC(±5%)
Linearity	±0.1%
Current Consumption	10mA+Output Current
Zero Offset Current	Within±0.2mA(IIN =0)
Bandwidth	DC~150kHz
Isolation Voltage	3kV rms/50Hz/Per Minute
Response Time	Less than 1µS
Temperature Drift	Within±0.01%/ºC

8.Attention:
To obtain the forward output current at the OUT terminal, the input current should flow in the direction specified by the arrow on the current sensor.
Before turning on the input current, connect the measuring resistor and turn on the DC supply voltage (+/-15V DC and GND).
If the maximum input current in the application is N times smaller than the rated input current, insert N turns through the central hole for better measuring accuracy.
9.Typical Application:
·Static converters for DC motor drives
·AC variable speed drives and servo motor drives
·Switched Mode Power Supplies (SMPS), Uninterruptable Power Supplies(UPS)

Beijing TransFar Electronics Group Co., Ltd is a national high-tech enterprise specializing in new energy precision electric quantity sensor, new energy reactor and special transformer and AC/DC, DC/DC module power supply, various kinds of small precision electromagnetic devices.

Headquartered in the Zhuangguancun IT Park, Chaoyang, Beijing, the company has been devoted to designing, manufacturing, and marketing as a whole and owns the brands of "BingZi" and "TransFar" , exports worldwide.

The company owns a production base in Wuyi High-tech Industrial Zone, Nanping City, Fujian Province, covering over an area of 80 mu(5000m²)5, construction area of 40,000 m² .  

The company is a council member of China Society of Power Supply, a standing council member of Beijing Power Supply Industry Association, a member of China Electronic Quality Management Association, a council member of trolley car industry Alliance, a certified ISO9001 quality system company, a customer satisfaction company and a customer satisfaction product company in China's electronic industry.

After decades of development,our company gathered a team of high level professionals. All types of products are able to achieve targeted professional design and high-quality manufacturing,with featured of good constructs, reasonable configuration, high Hi-Pot, good ability of heat dissipation and strong capacity of adapting ambient conditions, are widely used in the complex environment of different industries, such as electric vehicle, photovoltaic power generation,wind power generation, electrical intelligence, railway systems, industrial control systems, electrical-electronic devices, smart instruments and apparatus and general electrical equipment.

The product design is market-oriented. With continuous innovation, we focus on customers requirement and strive to create value for customers. Together with our competitors, we will make contribution to the prosperity and development of electronic components market and electrical-electronic industry.

Vision
To make the combination of electricity and magnetism more perfect.
We are committed to becoming a respected world class enterprise in the field of electromagnetic technology.

Company Tenet
Create the first class products known by the world and become outstanding.

Mission
To make automation more energy-saving, safer and more efficient.

Core Values
Profession, concentration; diligence, pragmatism; quality, safety; mutual-win growth.

Company Culture
"Devotion and Practicability", "Equality, Respect and Teamwork"

Company Goal
Realize the goal of markets-leading and profit-increasing basing upon innovative designing, unique business philosophy and effective management, insisting on innovation.

Quality Guideline
We provide excellent products to satisfy our clients' requirements, achieve the aims of market leading & profit increasing, and realize the company tenet of "Create the first class products known by the world and become outstanding.