HS92-a-C Series Current Sensor/Transducer

• Type: Hall Type
• Output Signal Type: Digital Output
• Production Process: SemiConductor Integrated
• Model NO.: HS92-A-C
• Material: Plastic
• Accuracy Grade: 1.0G
• Application: Switching Power Supply
• IP Rating: IP55
• Certification: RoHS
• Customized: Customized
• Specification: 38.5*22*24.6cm
• Trademark: TransFar
• Origin: China

Product Description

DESTCRIPTION:            
                                                                
For the electronic measurement of currents: DC, AC, pulsed..., with galvanic separation between the primary circuit and the secondary circuit.

FEATURES:            
                                                                   
Open loop using the Hall ASIC effect 
Original side and side isolation
Low power consumption
Wide range
No insertion loss                                                                                  
Raw materials recognized according to UL 94-V0

APPLICATION:       
                                                                      
Motor controller
Uninterruptible Power Supply (UPS)
 Static converters for DC motor drives
Switched Mode Power Supplies (SMPS)
Power supplies for welding applications


MODEL LIST:

Product model
Model	Rated input current IPN (A)	Measuring range IPM (A)
HS92-25A / 200A-C	25/200	± 25/ ± 200
HS92-50A / 200A-C	50/200	± 50/ ± 200
HS92-30A / 350A-C	30/350	± 30/ ± 350
HS92-20A / 500A-C	20/500	± 20/ ± 500
HS92-75A / 500A-C	75/500	± 75/ ± 500
HS92-75A / 750A-C	75/750	± 75/ ± 750
HS92-75A /1000A-C	75/1000	± 75/ ±1000

 

Note:
 

1. The output voltage U_out , the offset voltage U_QOV , and the sensitivity G_th are completely proportional to the power supply Vc;

 

1. The frequency of the current to be measured needs to be limited within the frequency band of the sensor, otherwise it will cause the core and chip to overheat;

 

1. Incorrect wiring may damage the sensor.

Insulation data:

 

Parameter	Symbol	Unit	Value	Comment
AC isolation withstand voltage test RMS @ 50Hz, 1min	UD	KV	2
Impulse withstand voltage 1.2/50uS	UW	KV	-
Shell material	-	-	UL94-V0	PBT 30 GF
Relative tracking index	CTI	V	425
Creepage distance	dCP	mm	3.1
Electrical clearance	dCI	mm	3.1

Maximum limit:

 

Parameter	Symbol	Unit	Value
Supply voltage	VC	V	14
Continuous output current	Iout	mA	10
Electrostatic discharge - contact discharge	VESD	KV	2

Mechanical Dimensions:




        
Safety

This device must be used according to  IEC61010-1. 

This device must be used in electric/electronic equipment with respect to applicable standards and safety requirements in accordance with the operating instructions.

Caution, risk of electrical shock.

When operating the device, certain parts can carry hazardous voltage (eg. primary busbar, power supply). Ignoring this warning can lead to injury and/or cause serious damage.
This is a built-in device, whose conducting parts must be inaccessible after installation.
A protective housing or additional shield can be used.
Main supply must be able to be disconnected.