HS03-25A-Np Series Current Sensor/Transducer

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Model NO.: HS03
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

HS03-25A-NP SERIES CURRENT SENSOR/TRANSDUCER

DESCRIPTION:

For the electronic measurement of current: DC, AC, pulsed ..., with galvanic separation between the primary and the secondary circuit.

 

 

FEATURES:

  Closed loop using the Hall effect
   Galvanic separation between the primary and the secondary circuit
  Low power consumption
  Wide range
  No insertion loss
   Raw materials recognized according to UL 94-V0


APPLICATIONS:

  Inverter
  Uninterruptible Power Supplies (UPS)
  Static converters for DC motor drives
  Switched Mode Power Supplies (SMPS)
  Power supplies for welding applications
  Battery management
 

MODEL LIST:
 

Product model
Model	Rated input current IPN (A)	Measuring range IPM (A)
HS03-25A-NP	2 5	0~ ± 36

 

HS03-25A-P SPECIFICATION

Parameter	Symbol	Unit	Value	Test Conditions
Electrical Data
Supply voltage (±5%) ^(1)	VC	V	±15
Current consumption	IC	mA	10+output current
Output current ISN	ISN	mA	25
Overcurrent capability (1ms )	IPC	At	-
Insulation resistance	RIS	MΩ	> 1500	@500VDC
Internal impedance	RS	Ω	110	approximation
Load Resistor ^(2)	RM	Ω	0~320	@ IPN
Performance Data
Linearity ^(3)(0…± IPN )	εL	%of IPN	<± 0.2%	@TA = 25°C
Precision	X	%	<± 0.5%	@ IPN , TA = 25°C
				( remove zero offset current )
Zero offset current	IOE	mA	<± 0.15	@ IP= 0 , TA=25°C
Magnetic offset current	IOM	mA	<± 0.15	@ IP= 0;
				3 times the rated current after impact
Zero offset temperature drift	IOT	mA	<± 0.25	@ IP =0 , @ 0 ~ 25 °C
			<± 0.35	@ IP =0 , @ 25~ +70 °C
Response time	tr	µS	< 1	@ 90% of IPN step response
Current follows di /dt	di/dt	A/µS	> 50
Bandwidth ^(4)	BW	kHz	DC~ 15 0	@-3dB
General Data
Ambient operating temperature	TA	ºC	0….+ 70
Ambient storage temperature	TS	ºC	- 25 ….+ 85
Mass	m	g	22	approximation

Notice:
(1) Under the power supply condition of ±12V≤VC≤±15V, the measurement range of the sensor will be reduced;

(2) If the customer uses the rated load resistance, the current to be measured needs to be limited to the rated current. If the full-scale current is to be measured, the load resistance should be smaller than the rated resistance .

(3) Linearity data does not include zero offset;


Insulation data:                       
 

Parameter	Symbol	Unit	Value	Remark
AC isolation withstand voltage test RMS @ 50Hz, 1min	UD	KV	2.5
Impulse withstand voltage 1.2/50uS	UW	KV	-
Shell material	-	-	UL94-V0	PPO
Relative tracking index	CTI	PLC	-
Creepage distance	dCP	mm	11
Electrical clearance	dCI	mm	11

Maximum limit:
 

Parameter	Symbol	Unit	Value
Supply voltage	VC	V	±18
Output current (output shorted to ground)	Iout	mA	-
Electrostatic discharge - contact discharge	VESD	V	-