HS19-a-C Series Current Sensor/Transducer

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Model NO.: HS19
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

HS19-A-C SERIES CURRENT SENSOR/TRANSDUCER

DESCRIPTION:

For the electronic measurement of current: DC, AC, pulsed ..., with galvanic separation between the primary and the secondary circuit.
 

 

FEATURES:

  Open loop using the Hall effect
  The primary side and the secondary side are isolated
  Low power consumption
  Wide range
  No insertion loss
   Raw materials recognized according to UL 94-V0


APPLICATIONS:

  Inverter
  Uninterruptible Power Supplies (UPS)
  Static converters for DC motor drives
  Switched Model Power Supply (SMPS)
  Power supplies for welding applications
  Battery management
 

MODEL LIST:
 

Product model
Model	Rated Input Current IPN (A)	Measuring Range IPM (A)
HS19-  50A-C	50	±150
HS19-  75A-C	75	±225
HS19-100A-C	100	±300
HS19-150A-C	150	±450
HS19-200A-C	200	±600
HS19-300A-C	300	±900
HS19-400A-C	400	±900
HS19-500A-C	500	±900
HS19-600A-C	600	±900

HS19-A-C SPECIFICATION
 

Parameter	Symbol	Unit	Value	Test Conditions
Electrical Data
Supply voltage (±5%) ^(1)	VC	V	±15
Current consumption	IC	mA	±15
Output voltage ( analog output )	VOUT	mV	±4V±40	@ ± IPN , RL = 10 kΩ, TA = 25°C
Overcurrent capability (1ms )	IPC	At	50* IPN
Insulation resistance	RIS	MΩ	>1000	@500VDC
Internal impedance	ROUT	Ω	100	approximation
Load Resistor ^(2)	RL	KΩ	>10
Performance Data
Linearity ^(3)(0…± IPN )	εL	%of IPN	<±1
Precision	X	%	<±1	@ IPN , TA = 25°C
				( remove zero offset voltage)
Zero offset voltage	VOE	mV	<±20	@TA = 25°C
Magnetic offset voltage	VOM	mV	<±20	@IP=0;
				1 times the rated current impact
Zero offset temperature drift	TCVOE	mV/K	<±2	@ HS19-50A~75A-C
			<±1	@ HS19-100A~600A-C
Output offset temperature drift	TCVOUT	%/K	<±0.1	@% of reading
Response time	tr	µS	<3	@ 90% of IPN step response
Current follows di /dt	di/dt	A/µS	>50
Bandwidth ^(4)	BW	kHz	DC~50	@-3dB
General Data
Ambient operating temperature	TA	ºC	TA
Ambient storage temperature	TS	ºC	TS
Mass	m	g	m	approximation

Notice:

1. Under the power supply condition of ±12V≤VC≤±15V, the measurement range of the sensor will be reduced;

 

1. If the customer uses a load resistance of 1 KΩ, the current to be measured needs to be limited to the rated current. If the full-scale current is to be measured, the load resistance should beat least 10 KΩ.

(3) Linearity data does not include zero offset.


Insulation data:                       
 

Parameter	Symbol	Unit	Value	Remark
AC isolation withstand voltage test RMS @ 50Hz, 1min	UD	KV	3.6
Impulse withstand voltage 1.2/50uS	UW	KV	6.6
Shell material	-	-	UL94-V0	PBT+30%GF
Relative tracking index	CTI	V	275
Creepage distance	dCP	mm	7.08
Electrical clearance	dCI	mm	6.23

Maximum limit :
 

Parameter	Symbol	Unit	Value
Supply voltage	VC	V	±18
Output current (output shorted to ground)	Iout	mA	-
Electrostatic discharge - contact discharge	VESD	V	4000