HS65-500A-C Current Transducer

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Model NO.: HS65
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

 

HS65-500A-C Current Transducer

DESCRIPTION:

For the electronic measurement of current: DC, AC, pulsed ..., with galvanic separation between the primary and the secondary circuit.
 

FEATURES:

 

  Open loop using the Hall effect

  The primary side and the secondary side are isolated
  Low power consumption
  Wide range
  No insertion loss
  Raw materials recognized according to UL 94-V0.


APPLICATIONS:

  Inverter
  Uninterruptible Power Supplies (UPS)
  Static converters for DC motor drives  
  Switched Mode Power Supplies (SMPS)
  Power supplies for welding applications
  Battery management.


 MODEL LIST:

Product model
Model	Rated input current IPN (A)	Measuring range IPM (A)
HS65-500A-C	500	±750

HS65-500A-C SPECIFICATION

Parameter	Symbol	Unit	Value	Test Conditions
Electrical Data
Supply voltage (±5%) ^(1)	VC	V	±15~±24V
Current consumption	IC	mA	28+output current
Output current Isn	Isn	mA	100
Overcurrent capability (1ms )	IPC	At	-
Insulation resistance	RIS	MΩ	>2000	@ 500 VDC
Internal impedance	RS	Ω	40	approximation
Load Resistor ^(2)	RM	Ω	0~50
Performance Data
Linearity ^(3)(0…± IPN )	εL	%of IPN	<±0.1%	@TA = 25°C
Precision	X	%	<±0.5%	@ IPN, TA = 25°C
				( remove zero offset current )
Zero offset current	IOE	mA	<±0.2	@ IP=0, TA = 25°C
Magnetic offset current	IOM	mA	<±0.1	@ IP= 0;
				3 times the rated current impact
Zero offset temperature drift	IOT	mA	<±0.8	@ IP=0, @-40 ~ +85°C
Response time	tr	µS	<1	@ 90% of IPN step response
Current follows di /dt	di/dt	A/µS	>100
Bandwidth ^(4)	BW	kHz	DC~150	@-3dB
General Data
Working ambient temperature	TA	ºC	-40….+85
Storage ambient temperature	TS	ºC	-40….+100
Weight	m	g	550	approximation

Notice:
(1) Under the power supply condition of ± 15 V≤VC<± 24 V, the measurement range of the sensor will be reduced;

(2) If the customer uses a load resistance of 0~18 Ω, the current to be measured needs to be limited to the rated current. If the full-scale current is to be measured, the load resistance should be within 0~4 Ω;

(3) Linearity data does not include zero offset.


Insulation data:          
 

Parameter	Symbol	Unit	Value	Remark
AC isolation withstand voltage test RMS @ 50Hz, 1min	UD	KV	3.8
Impulse withstand voltage 1.2/50uS	UW	KV	16
Shell material	-	-	UL94-V0	PBT+30%GF
Relative tracking index	CTI	V	175
Creepage distance	dCP	mm	21
Electrical clearance	dCI	mm	20

Maximum limit :
 

Parameter	Symbol	Unit	Value
Supply voltage	VC	V	±24
Output current (output shorted to ground)	Iout	mA	-
Electrostatic discharge - contact discharge	VESD	V	-