HS-P Series Hall Current Sensor

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Model NO.: HS
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

HS-P Series Hall Current Sensor

LI051V1/2008-EN
1.Features:
With an elegant outline and the ability to be directly soldered onto a PCB.
Utilizing Hall's effect and magnetic compensation, this device offers high galvanic isolation between the primary and secondary loops being measured.
Capable of measuring DC, AC, and impulse currents.
Completely sealed, with strong mechanical and environmental endurance, as well as strong dielectric strength, this device is safe and reliable.
2.Ambient Conditions:
Ambient temperature: -20ºC~+75ºC;
Relative humidity: ≤90% at 40ºC;
Storage temperature: -40ºC~+95ºC
Atmospheric pressure: 860~1060mbar
(about 650~800mmHg);
3.Range of Operating Frequency: 0~150kHz;
4.Insulation Rating: Class B (130ºC).
5.Safety features:
Insulation resistance: >1000MΩ in normal condition;
Insulation withstand voltages: 3000V 50Hz/1 min;
Fire retardancy: In conformity with UL94-Vo.
6.Outline Drawing, Installation Dimension: (unit : mm)
 (Note:NC means no connecting pin, only for fixing)
7.Technical Parameters:

Models Spec.	HS-20A-P	HS-30A-P	HS-50A-P	HS-100A-P
Rated Input Current(IIN)	20A	30A	50A	100A
Measuring Range	0~30A	0~45A	0~75A	0~150A
Rated Output Current(IOUT)	50mA	50mA	100mA	100mA
Measuring Resistor	≤ 85Ω	≤80Ω	≤40Ω	≤30Ω
Working Voltage	±15V DC(±5%)
Linearity	±0.1%
Current Consumption	10mA+Output Current
Zero Offset Current	Within±0.2mA(IIN =0)
Bandwidth	DC~150kHz
Isolation Voltage	3kV rms/50Hz/Per Minute
Response Time	Less than 1µS
Temperature Drift	Within±0.01%/ºC

8.Attention:
To obtain the forward output current at the OUT terminal, the input current should flow in the direction specified by the arrow on the current sensor.
Before turning on the input current, connect the measuring resistor and turn on the DC supply voltage (+/-15V DC and GND).
If the maximum input current in the application is N times smaller than the rated input current, insert N turns through the central hole for better measuring accuracy.
9.Typical Application:
·Static converters for DC motor drives
·AC variable speed drives and servo motor drives
·Switched Mode Power Supplies (SMPS), Uninterruptable Power Supplies(UPS)