HS06-P Series Current Sensor/Transducer

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.1G
• Application: Switching Power Supply
• Model NO.: HS06
• Customized: Customized
• Transport Package: Carton
• Specification: 38.5*22*24.6cm
• Trademark: TRANSFAR
• Origin: China
• HS Code: 9030339000
• Production Capacity: 100000 Pieces Per Year

Product Description

HS06-P SERIES CURRENT SENSOR/TRANSDUCER

1. Features
It is directly welded and installed on the printed circuit board , which is small in size and beautiful in appearance;
Using the Hall effect open-loop principle, the circuit under test is isolated from the test circuit;
It is used to measure the current of DC, AC, pulsating current and various irregular waveforms;
Low temperature drift, fast response time, strong anti-interference ability.

2. Ambient Conditions
Environmental operating range: -25ºC~+ 85 ºC;
Ambient temperature: -40ºC~+ 100 ºC;
Relative humidity: ≤90% at 40ºC;
Atmospheric pressure: 860~1060m bar (about 650 ~ 800mmHg ).
                                                                                                                 

3. Range of working frequency: 0-20 kHz.

4. Insulation Rating: Class B (130ºC).
 

5. Safety Features:

Insulation resistance: > 1000MΩ in normal condition;
Insulation withstand voltages: 2.5k V/1 min;
Fire retardancy: In conformity with UL94-V0.

6. Outline drawing and installation dimensions: as shown in the figure (in mm)

 

7. Performance parameters :

Model Technical parameter	HS06-10A-P	HS06-20A-P	HS06-30A-P	HS06-40A-P
Rated input current IPN	10A	20A	30A	40A
Measuring range	0~±20A	0~±40A	0~±60A	0~±80A
Rated output voltage VSN	2.5V ± 1V (± 1 % )
Operating Voltage	5V DC(±5%)
Load Resistance	≥ 10kΩ
Zero offset voltage	IP = 0   TA = 25ºC2.5 V ±1%
Linearity	<1%
Current consumption	20mA
Bandwidth	DC~20kHz
Insulation withstand voltage	2.5 kV rms/50Hz/1min
Response time	< 3 μs
Temperature drift	<±0.01%/ºC

8. Instructions for use and precautions
In order to obtain a forward output voltage at OUT , the input current must flow in the direction indicated by the arrow.
When using, first connect the load and connect the 5V working voltage, and then connect the input current.
The sensor output signal type is the same as the input signal.
Secondary connection:
+5V: +5V DC
   0: 0V
   OUT: output terminal

9. Typical applications
DC variable frequency speed regulation, servo motor drives
Static converters for DC motor drives
Uninterruptible Power Supplies (UPS)
Switched Model Power Supplies (SMPS)
Power supplies for welding applications